Pro Intercom Remote Sub-Master, 3-circuit, IFB 5 male - 1 female XLR

Description

Pro Intercom Remote Sub-Master, 3-circuit, IFB 5 male - 1 female XLR
Pro Intercom Remote Sub-Master, 3-circuit, IFB 5 male - 1 female XLR
The RSM300 provides for specialty groups within the technical staff to have their own
sub-networks while the group directors remain in communications with the director/producer who is at the Master Station.
A classic example is lighting, where the lighting director would have an RSM300 with her
Circuit X connected to one of the circuits on the MS301 Master Station while her Y-circuit is connected to specialty lighting or effects and her Z-circuit is connected to the follow-spot operators. She now has communications with 3 different groups, all independent
of one another. None can hear the others, unless she chooses to use her linking switch.
The RSM300 can be used with a headset or, if far enough away from the stations to which
she is talking, and the noise level is not excessive, she can plug a noise-canceling, closetalking gooseneck microphone into the front panel and use it with the built-in speaker for
hands free two-way communications. See ‘Sidetone’’ below.
The ‘Talk’ buttons are either momentary (press and hold) or latching (tap once, tap again
to shut off). The audio level at which each circuit is heard locally is individually adjustable.
A signal LED (bright green) is provided for each circuit should it be turned down or off,
and pressing the signal button lights the signal lamps on the other stations connected to
the same circuit. The speaker can be turned off and its level adjusted.
Both dynamic and electret microphones can be used, either as part of a headset or as
gooseneck mic. The selector button is marked ‘Mic Type’ and an LED announces the status.
The smallest control on the front panel could be the most useful. It is marked with a symbol which indicates ‘Sidetone’, the sound of your own voice coming to your own earphone from your own microphone. With the RSM300 it can be used to adjust your volume
in your headset, or lower the level of your own voice coming from the speaker, thus making hands-free use possible. The control only affects local levels, not what others hear.
If the system has a program feed and the RSM300’s X-circuit is connected to a circuit on
the MS301 which has the program on it, the RSM300 operators will hear it on the X-circuit.
It cannot be passed along to circuits Y and Z.