Furman P-1800 PF R 15 Amp Power Conditioner + SKB 1SKB-R102 10U x 2U Slant Combo

Description

ProAudioStar
DJ GEAR
INSTRUMENT GEAR
LIVE SOUND
RECORDING
MICROPHONES
HEADPHONES
ACCESSORIES
SOFTWARE
LIGHTING
BUNDLES
Authorized Dealer - Full Warranty
Furman P-1800 PF R + SKB 1SKB-R102
15 Amp Power Conditioner with 10U x 2U Slant Combo Rack
- Bundle Deal -
Description
Package Includes :
1 x Furman P-1800 PF R
1 x SKB 1SKB-R102
Furman P-1800 PF R
Engineered specifically for use with instrument amplifiers and other high-current equipment, the Furman P-1800 PF R offers a stable, protected and filtered low impedance powered supply for maximum performance of connected electronics. Furman's exclusive Power Factor provides a 45A peak current reservoir to minimize the detrimental effects of line impedance on high-current gear such as amplifiers and powered monitors. Clear Tone Technology provides additional line noise filtration tuned for instrument amplifiers for clean and consistent tone. Plus, equipment benefits from professional-level protection thanks to Furman's exclusive SMP and EVS technologies.
Power Factor Technology
Your amp needs a lot of power to sound its best. If you’re plugging into the wall, there’s a good chance your amp is not going to get the current it needs when pushed. Furman’s exclusive Power Factor Technology provides a 45A peak current reservoir to give your amp the headroom it needs to operate at maximum efficiency. No matter what venue or club, or how close or far away from the power panel, Furman’s Power Factor Technology keeps your instrument amplifier’s tone consistent and sounding it’s best.
Clear Tone Technology
Clear Tone Technology works in unison with Power Factor Technology and Linear Filtering Technology to add an additional layer of AC noise filtration specifically engineered for instrument amplifiers. Clear Tone Technology provides tuned circuits that unveil instrument tone, harmonics, and clarity, resulting in a fuller sound and improved dynamic response.
SKB 1SKB-R102
The 1SKB-R102 is a 10U slanted top and 2U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking in transport and storage.
Features/Specs
Furman P-1800 PF R
Power Factor Technology
Power Factor Technology supplies 45+ amps of instantaneous reserve current, on demand, for power starved amplifiers.
Surge Protection
Furman’s exclusive SMP technology provides the highest level of surge & spike protection available.
Noise Filtration
LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.
Voltage Protection
Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
Diagnostic Lights
LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.
Isolated Banks
Isolated outlet banks minimize inter-component interference and noise contamination.
Clear Tone Technology
Clear Tone Technology provides tuned filtering circuits engineered for instrument amplifiers to provide a clean and consistent tone.
Voltmeter
Large digital voltmeter with discrete dimmer button displays incoming line voltage.
Wall Wart Spacing
Three widely spaced outlets accommodate bulky AC power transformers.
15 AMP Rating
15 Amp rating featuring a high inrush magnetic circuit breaker for added protection.
Nine Total Outlets
Nine total outlets (8 rear panel outlets and one front panel convenience outlet).
BNC Lamp Connector
Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination.
USB Charger
Front panel USB convenience outlets allows you to charge most media devices or power a USB lamp.
General
Family : Prestige Series
Line Voltage : 120 (Volts)
Number of Outlets : 9
Number of Isolated Banks : 3
Outlet Descriptions : All 9 outlets linearly filtered and surge protected. 2 rear panel outlets are high current outlets.
Rack Mountable : Yes
Rack Ears Included : Yes
Front Panel Meter(s) : LED voltmeter displays incoming line voltage
Front Media Light(s) : No
ControlFront panel :
On/Off switch
Voltage meter dimmer button
Voltage Regulation : No
Compliancec : ETLus
USB Charging : 1 front panel USB charger
Low Voltage Trigger : N/A
AC Power Cord : 10 ft. captive 3/14 AWG, black cord with NEMA 15 plug
Dimensions : 19" W x 10.5" D x 1.75" H
Power Consumption : 8 Watts
AC Protection
AC Protection Technology : Extreme Voltage Shutdown
Series Multi-Stage Protection
Non-sacrificial protection with zero ground contamination
Under-Voltage Shutoff : 90V
Over-Voltage Shutoff : 140 VAC
Maximum Current Rating : 15 (Amps)
Initial Clamping Level : 188 VAC peak @ 3,000 Amps
Filtration
Filtration Technology : LiFT, Clear Tone Technology
Filtration Rating : 30 dB @ 2kHz
40 dB @ 10kHz
50 dB @ 20kHz
70 DB @ 100KHZ
Signal Line Protection : No
Shipping Info
Length : 21.9 (Inches)
Width : 14.8 (Inches)
Height : 4.1 (Inches)
Unit of Measure : Each
UPC : 654061028123
Master Pack Qty : 2
Other Specifications
BNC socket with switch for rear rack lamp : 12VAC 500mA max (lamp not included)
Response time : 1 nanosecond
Maximum surge current : 6,500 Amps
Reactive power : 460 VA
SKB 1SKB-R102
10U Slanted rackmount on top
2U rackmount in front
Steel threaded rails
Hard lid and doors
Side access ports for cable routing
Injection molded front and rear doors and lid
Two TSA locking patented trigger latches
Stackable for storage and transport
Exterior Length : 23.50 in 59.69 cm
Exterior Width : 23.50 in 59.69 cm
Exterior Depth : 14.50 in   36.83 cm
Carton Length :  24.00  in 60. 96 cm
Carton Width :  24.00  in 60. 96 cm
Carton Depth : 15.00 in 38. 10 cm
Rack Space Units Top : 10    10
Rack Space Units Bottom : 2  2
Rack Depth Front Rail to Back Lid : 0.00 in 0.00 cm
The top rack has 17.5" rackable depth plus 2.25" in back for cables for a total of 19.75" on the top.
The lower 2U Rack is 3.5" high in front and 5.75" high in the rear with a 19.5" of useable depth.
We are authorized dealers for all these brands. Click a logo to see our listings.
ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge.
If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost.
Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES.
We provide free shipping to the contiguous 48 United States, on most items.
Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost.
We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit.
We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service.
Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order.
Please contact us for a Return Authorization before returning any items.